Are the Calibration Standrads the same for both PITC and NPH parts of the MxQuant kit?

• Related Articles

• Are the QC samples the same for both PITC and NPH parts of the MxQuant kit?

  No, the QC samples are not the same for PITC and NPH. Separate sets of QC samples are provided specifically for each part of the kit. Please refer to the respective kit user manual.

• Maximum unknown sample volumes for MxP Quant 1000 kit?

  If you wish to add more sample volume on a filter of the test plate, please note that extra drying steps are required to ensure proper results. Please see the table below. Kit part Sample volume Standard Maximum NPH 20 µL 30 µL PITC 10 µL dry after ...

• Pressure manifold with MxP Quant 1000 kit

  If a pressure manifold is to be used with the MxP Quant 1000 kit, a special adapter is required for drying steps, please see the Product number: 20981. Do not use the adapter for pressure manifold for the elution of extracts.

• What happens if I use the kit after it expires?

  All kit components requiring a refrigeration are subject to expiration (light blue box). These are the Vial Box and the Kit Plate. After passing the expiration date, the kit can still be used. However, the proper performance cannot be guaranteed. ...

• Why do extracts appear cloudy?

  For AbsoluteIDQ® p180, p400 HR and MxP® Quant 500 kits: When adding water to the methanolic sample extracts to make the LC plate, cloudiness can occur due to residues of pyridine and phenyl isothiocyanate from the derivatization solution. If that ...