Can I use speed vac for drying the test plate?

• Related Articles

• Why the extracts did not go through the filters or the volumes in the capture plate are low/inconsistent?

  Inconsistent or lack of volume in the filter plate may occur for several reasons. Below are some suggestions: Water or another solvent was used for making the extraction solvent instead of Methanol. Perform the following steps: Transfer the extracts ...

• Does the whole kit plate need to be prepared at once?

  A kit must be prepared all at once, as it is sealed under nitrogen to prevent degradation. Kits are for single use only.

• What happens if I use the kit after it expires?

  All kit components requiring a refrigeration are subject to expiration (light blue box). These are the Vial Box and the Kit Plate. After passing the expiration date, the kit can still be used. However, the proper performance cannot be guaranteed. ...

• Maximum unknown sample volumes for MxP Quant 1000 kit?

  If you wish to add more sample volume on a filter of the test plate, please note that extra drying steps are required to ensure proper results. Please see the table below. Kit part Sample volume Standard Maximum NPH 20 µL 30 µL PITC 10 µL dry after ...

• Pressure manifold with MxP Quant 1000 kit

  If a pressure manifold is to be used with the MxP Quant 1000 kit, a special adapter is required for drying steps, please see the Product number: 20981. Do not use the adapter for pressure manifold for the elution of extracts.