What is the runtime per sample and kit?
Run time per sample / min
Run time per kit / h
Related Articles
Maximum unknown sample volumes for MxP Quant 1000 kit?
If you wish to add more sample volume on a filter of the test plate, please note that extra drying steps are required to ensure proper results. Please see the table below. Kit part Sample volume Standard Maximum NPH 20 µL 30 µL PITC 10 µL dry after ...Why are there signals in the blank or in the zero samples, why are analytes in the zero samples above LOD?
The blank well A1 does not contain any analytes or internal standards. The zero samples only contain internal standards, but no analytes. If there are still peaks the following may have occurred: A sample or internal standard mix was accidentally ...Pressure manifold with MxP Quant 1000 kit
If a pressure manifold is to be used with the MxP Quant 1000 kit, a special adapter is required for drying steps, please see the Product number: 20981. Do not use the adapter for pressure manifold for the elution of extracts.Does the whole kit plate need to be prepared at once?
A kit must be prepared all at once, as it is sealed under nitrogen to prevent degradation. Kits are for single use only.What happens if I use the kit after it expires?
All kit components requiring a refrigeration are subject to expiration (light blue box). These are the Vial Box and the Kit Plate. After passing the expiration date, the kit can still be used. However, the proper performance cannot be guaranteed. ...